How to Measure Treadmill Belt at Home-گھر میں ٹریڈمل بیلٹ کیسے پیمائش کریں

Measuring belt is easy task. If you want to replace your treadmill belt with new one. Its so easy and you can do it at home / office or gym without any tension. Most of our customers ask the similar questions. With this reading, you will be able to measure your belt.

  1. How can they measure their belt?
  2. They have doubts in measuring belt and can not ensure the size.
  3. Size is different in every attempt.
  4. Related questions.

Measure Treadmill belt at home

If you follow our instructions, you will find accurate size in every attempt and you would have no doubt on treadmill belt size. There are three different methods to measure belt. We highly recommend to recheck or reconfirm after remeasuring twice or thrice to avoid any mistake.

Once after size confirmation, Order jogging belt to Umar Farooq Belting for better belt material and long lasting Conveyor belt joint type.

Important Note: Make all measurements straight, moving from right to left or left to right or non straight lines may cause imperfect size

Treadmill Belt measurement Method No. 1

Step 1: Make a mark at your belt (Full width mark – use visible color or mark with white tape)

Step 2: Get a measuring tape or long scale (do not use 6 inch or 1 feet scale)

Step 3: Start measuring belt from Full width mark

Step 4: Once you measure the front size of belt, make a small mark at this point and note the length

Step 5: Measure from small mark to next small mark. Note this length also

Step 6: Measure from 2nd small mark to 1st full width mark.

Step 7: Measure belt width.

مرحلہ نمبر 1: آپ کے بیلٹ پر ایک نشان بنائیں (مکمل چوڑائی کا نشان – ظاہر رنگ کا استعمال کریں یا سفید ٹیپ کے ساتھ نشان زد کریں)

مرحلہ 2: ماپنےکےلیے فیتہ ٹیپ سے لمبائی حاصل کریں (6 انچ یا 1 فٹ والے پیمانے استعمال نہ کریں)

مرحلہ 3: مکمل چوڑائی کے نشان سے بیلٹ کی پیمائش شروع کریں

مرحلہ 4: ایک بار جب آپ بیلٹ کے سامنے سے سائز کی پیمائش کرتے ہیں، اس وقت وہاں پر ایک چھوٹا سا نشان لگاہیں اور لمبائی کو نوٹ کریں۔

مرحلہ 5: چھوٹے نشان سے اگلے چھوٹے نشان پر پیمائش کریں. یہ لمبائی بھی یاد رکھیں

مرحلہ 6: دوسری چھوٹی نشان سے پہلی مکمل چوڑائی تک کے نشان تک پیمایؑش کریں.

پیمایؑش مکمل ہو جا ےؑ گئ

مرحلہ 7: بیلٹ چوڑائی کا تعین(پیمایؑش) کریں.

اہم نوٹ:

صحیح پیمانے پر بائیں یا دائیں طرف نہ لے کر جایؑں نہی تو تمام پیمائش غلط ہو جاےؑ گی، یا سیدھا نا ناپنے کی وجہ سے سایؑز میں فرق آ سکتا ہے۔

Conveyor Belts Chevron

  • Excellent physical property of rubber, high adhesion and fatigue resistance
  • Integrated vulcanized cover and cleat rubber prevent the chevron belt cleat from coming off.
  • Better cleat rubber property and abrasion extend the useful life
  • Its adjustable design for various chevron conveyor belt by incline angle from range of 16º – 45º.
  • Excellent drainage character.


Chevron conveyor belt is designed for inclined transportation for conveying bulk material such as coal, sand, mineral, crop, package and bag depending on different loading material and inclined angle to choose suitable cleat height and chevron type to prevent loading material from dropping down.

  • Ports and transshipment operations
  • Wood industry
  • Smelteries
  • Coal-fired power plants
  • Agriculture
  • Recycling industry
  • Sand and gravel industry
  • Others


  • 1 – Excellent weather resistance and property of cleat, not easy to crack and become deformed.
  • 2 – High abrasive high tensile cleats.
  • 3 – Good flexibility and tear resistance.
  • 4 – Integrated vulcanized cleats and base belt prevent the cleats from coming off.
  • 5 – Different rubber property and carcass strength can be designed according to requirement.
  • C5
  • C5
  • 300-1200 mm
  • Full width or appointed width
  • 100 mm
  • 5 mm
  • C10
  • 10
  • 500-1200 mm
  • Full width or appointed width
  • 150 mm
  • 10 mm
  • C127
  • C127P850C127P1067
  • 900-1500 mm1200-1500 mm
  • 850 mm1067 mm
  • 295 mm381 mm
  • 12,7 mm12,7 mm
  • C15
  • C15C15V330C15V450C15V380C15V600C15V740
  • 500-1200 mm400-800 mm500-800 mm450-800 mm650-900 mm800-1200 mm
  • Full width or appointed width330 mm450 mm380 mm600 mm740 mm
  • 200 mm250 mm250 mm250 mm250 mm250 mm
  • 15 mm15 mm15 mm15 mm15 mm15 mm
  • C17
  • C17P300C17P440C17P550C17P630C17P750C17P950C17P1050
  • 350-800 mm500-800 mm600-800 mm700-850 mm800-1000 mm1000-1200 mm1200-1500 mm
  • 300 mm440 mm550 mm630 mm750 mm950 mm1050 mm
  • 330 mm330 mm330 mm330 mm330 mm330 mm330 mm
  • 17 mm17 mm17 mm17 mm17 mm17 mm17 mm
  • C25
  • C25P450C25P550C25P750C25P1000
  • 500-750 mm600-1000 mm900-1200 mm1000-1500 mm
  • 450 mm550 mm750 mm1000 mm
  • 250 mm250 mm330 mm450 mm
  • 25 mm25 mm25 mm25 mm
  • Y32
  • Y32P600Y32P800
  • 650-1000 mm900-1200 mm
  • 600 mm800 mm
  • 300 mm333 mm
  • 32 mm32 mm
  • C32
  • C32P460500-800 mm460 mm330 mm32 mm
  • C32P580600-800 mm580 mm330 mm32 mm
  • C32P630700-1000 mm630 mm330 mm32 mm
  • C32P750900-1200 mm750 mm330 mm32 mm
  • C32P9501000-1500 mm950 mm330 mm32 mm



C127 P1067

C15 P450

C17 P440

C25 P450

Y32 P800

C32 P750

Download the Chevron Conveyor Belt PDF File DOWNLOAD PDF

3 Specialty High Temperature Conveyor Belts for Extreme Temperature Applications

When it comes to applications involving extreme temperatures it is important to give special consideration to the type of conveyor belt being used. High temperatures can cause serious damage to a conveyor belt making selecting the correct thickness of the cover a necessity.

At Sparks Belting, we have 3 specially designed high temperature belts to withstand extreme high or low heat.

1. The SR 25 Red Silicone Belt

SR 25 Conveyor Belt- Sparks Belting

The SR 25 is a thin yet strong belt that is ideal for heat sealing machines, shrink tunnels, automatic weighing and food conveyors, and food applications. It is made with fiberglass which gives it a very high heat resistance being able to withstand temperatures of -70° to 450° F. The silicone in the belt creates excellent release properties.  The SR 25 high temperature belt should be used on a small diameter pulley.       

2. Multi-Temp Conveyor Belt

Multi-Temp Conveyor Belt- Sparks Belting

The Multi-Temp belt is made from a butyl rubber compound which give this belt it’s high temperature resistance. However, this belt is usually recommended for extreme low temperature applications where cold rooms or freezers are involved. The Multi-Temp conveyor belt can withstand temperatures ranging from -60°-300° F and is considered to be a step up from the SR 25 as it can be utilized on larger diameter pulleys.

3. Tev Tex Conveyor Belt

Tev Tex Conveyor Belt- Sparks Belting

The Tev Tex conveyor belt comes in a 2 ply as well as a 3 ply version and can withstand temperatures of 0°-250° F.  These belts are made out of a Buna-N rubber compound with a Teflon surface cover. The Teflon cover on the Tev Tex belts allows for superior release and easy cleaning of sticky products such as candy, glue, chemicals, and hot plastics. Do not use conveyors with scrapers or where pulleys cause the belt to severely back-bend as this can damage the Teflon.

These 3 specialty belts are designed for extreme temperature applications. 

What Are Plies and Ply Adhesion?

Some conveyor belting is manufactured with one ply of fabric. This fabric layer can be coated with rubber, polymer or elastomer. Yet, most conveyor belting is manufactured using two or more plies of fabric that are adhered to each other by using inner layers of rubber, polymer or elastomer.

In addition, there can be top or bottom surface covers of rubber, polymer or elastomer.

While ply adhesion is defined as the force required to separate two adjoining plies, the reality is that ply adhesion is the force required to pull apart the adhesion that joins the plies. This is measured in pounds per inch or newtons per millimeter.

Conveyor belts operate on equipment that requires flexing over pulleys on the conveyor. This repeated flexing action will stress the ply adhesion of conveyor belts. As a result, it is important for the belt to have adequate ply adhesion to resist ply separation.

(the bottom ply bends over a smaller radius)

The test for ply adhesion is a “pull test” and can be accomplished with a simple clamping device and a fish scale. The test for ply adhesion is usually done on 1” wide x 8” long samples. Multiple samples of the product should be tested and tests should be conducted on the samples from both directions in order to achieve statistical measurements. Belt manufacturing processes can produce different measurements depending on direction of pull

In general terms, ply adhesion of less than 13-lbs per inch of width is considered unacceptably low. Ply adhesion of more than 50-lbs per inch of width is considered very high and can create challenges in belt fabrications where the plies need to be separated manually.

Synthetic fabrics (i.e. polyester, nylon) are often treated with RFL (resorcinol formaldehyde latex) during manufacturing in order to increase the ply adhesion because, without this treatment, the synthetic fabrics are too smooth and too resistant to effectively absorb the polymer, elastomer or rubber in a manner that achieves acceptable ply adhesion. Cotton, by contrast, is coarser and more absorbent, therefore not requiring RFL treatment to achieve acceptable ply adhesion.

Examples of Minimum Adhesion Standards in Sparks’ Belts

  • 14-lbs/inch Untreated Polyester- Poly Flake, Sno Cone, TevTex 22M & 32M
  • 18-lbs/inch Untreated Cotton/Nylon – HSW, 144 TevTex
  • 18-lbs/inch Untreated Cotton Polyester – 28 NOS, Nytop
  • 22-lbs/inch RFL Treated Polyester Econo- Rough Black, Food King 3W
  • RFL Treated Polyester/Nylon- 3XLN, 143 Ruff Tex, 415-N, Food King 1W

How V-Guide Strips Can Help with Belt Tracking

Dotted V Guide Strips

To assist with positive tracking, a guide strip(s) is often used on the pulley side of conveyor belts. V–guides are the most common shapes used. However, square and rectangular shapes are also available. In addition, Sparks has designed and developed round dot-guides for traveling over very small pulleys.

.Tracking assistance is often required on:

  • Short, wide conveyors
  • Conveyors with side-loading
  • Reversing conveyors

Guide strips will not guarantee tracking success on a conveyor or conveyor belt that is poorly manufactured or lacking dimensional accuracy. The conveyor system and conveyor belt should be manufactured to reasonably track by normal means so that the use of guide strips can further ensure trackability.

The conveyor pulleys, bed and/or idler rollers should have an opening that is 1/4” wider and 1/16” deeper than the guide strip on the conveyor belt. Or conversely, the guide strip furnished on the conveyor belt should be 1/4” narrower and 1/16” shallower than the opening in the pulley, bed and/or idler rollers of the conveyor system. Guide strips are intended to improve tracking. They are not designed to drive the belt!

In general, a larger pulley is required when guide strips are used in conjunction with the belt. Smaller sized guide strips will operate over smaller pulleys better than larger guide strips. Guide strips made of softer durometer materials (i.e. PVC) will operate over smaller pulleys better than harder durometer materials (i.e. Polyurethane). Notched or segmented guide strips will navigate smaller pulleys better than solid guide strips.

Guide strips can be supplied down the center of the bottom of the conveyor belt or off-center to reduce wandering (side to side movement).

While it seems logical that two guides are better than one, it isn’t always true! Two guide strips require more precision in the conveyor design and in the placement of the guides on the belt. However, when two guide strips are required, the critical dimension is the center to center distance of the guide strips from each other. This is far more accurate (due to width tolerances in belting) than measuring from each edge of the belt to the center of each guide strip!

The Purpose of Textiles in Conveyor Belting

Conveyor belts are the driving force in conveying operations. There are many different types and materials for the abundance of applications in the market. However, there are a few different textiles that serve an important purpose in conveyor belting.

Purpose of Textiles in Conveyor Belting

  • Provides Strength for Tensioning
  • Provides Strength for Handling the Load
  • Adds Rigidity or Stiffness, “Gives it Body”
  • Improves Mechanical Fastener Retention
  • Improves Wear Against the Conveyor Bed
  • Reduces Sliding Drag on Product or Conveyor Bed

Types of Textiles/Fibers Used in Conveyor Belting


Cotton & Wool

Solid woven cotton is often used in baking applications where belts must “breathe”, absorb, and/or handle warm products. It is also used in applications to handle warm, green rubber products. Cotton is used in length, width, or in both directions of multiple plied conveyor belting to increase the bulk of the overall product on applications which require resistance to impact without requiring high strength.  Most commonly, it is placed either on the top or bottom ply of multiple plied belts to provide lower drag against the conveyor bed or some conveyed products – like cartons.

Characteristics & Properties

  • Moderate Strength
  • High Bulk – a course, thick fiber
  • High absorbing
  • Low modulus – high elongation
  • Low cut and abrasion resistance
  • Moderate temperature resistance
  • Low mildew resistance


Synthetic – Aramid, Nylon, Polyester 


A nylon core is used to provide high strength as required in some flour, paper, box, and wood applications for conveying products or transmission of power. It is used as the width fiber (fill yarn) in conveyor belting to increase rip resistance and fastener retention as well as to resist abrasion from building material products.

Characteristics & Properties

  • High Strength
  • High Elasticity – Stretch and Shrink
  • Moderately Absorbing
  • Moderate elongation
  • High Cut and Abrasion Resistance
  • High Mildew Resistance


Solid woven polyester is used as a durable and low cost option for general conveyance, with specific uses in parcel, package, and baggage applications. Polyester is used in the length (warp), width (fill), or in both directions of the weave as an inexpensive carcass for multiple plied conveyor belting. Spun polyester generates less noise and is used when higher speeds are used on long(er) slider bed applications.

Characteristics & Properties

  • High Strength
  • Low Elasticity – Stretch and Shrink
  • Moderately Absorbing
  • Moderate Elongation
  • Moderate Cut and Abrasion Resistance
  • Low Temperature Resistance
  • High Mildew Resistance

Aramid (Kevlar):

Kevlar is used in glass applications where belts must withstand hot temperatures and retard flames, in heavy applications near industrial furnaces or conveying hot products being discharged from heat processes, and in heavy applications where resistance to high or heavy impact is important.

Characteristics & Properties

  • High Strength
  • High Bulk – A Coarse, Thick Fiber
  • High Modulus – Low Elongation
  • High Flame Resistance
  • High Impact Resistance
  • High Temperature Resistance

Blending of Textiles

A blend of textiles is often used to gain the benefits of a variety of features that provide solutions and enhance belt 

PVC & PU & PVK & PE conveyer belt

We can customize PVC & PU & PVK & PE conveyer belt according to your requirements 


Item Heat Resistant Rough Top Portable Conveyer Belt with Best Price
Thickness 0.5-12mm
Width ≤3000mm
Material PVC/PU/PVK/PE
Color Green, white, petrol green, black, grey, dark grey, dark green, sky blue, orange, yellow, transparent, etc
Pattern Smooth, diamond, saw tooth, both way saw tooth, rough top, matt, squire rough top, stripe, dot, lozenge, checker, golf, wave rough top, herringbone, treadmill, mini-grip, crescent, tape, majiang, solid-woven, sort tooth, etc.
No. of Plies 1ply, 2plies, 3plies, 4plies, and so on
Coating’s Feature Antistatic, thicker, harder, deeper, softer, fire-resistant, oil-resitant, cold-resistant, etc.
Fabric’s Feature Flexible, kevlai, felt, low-noise, jogger, cotton
Working Temperature -25/+80 ℃

PU Food conveyor belt

PU Conveyor Belt is produced under advanced technology with improved production material properties. These are designed for changing industrial environmental requirements. It is more efficient & effective compared to PVC Conveyor Belts.

PU Conveyor Belt Origin

We offer imported long-lasting machine friendly PU Belt. PU Conveyor is available in different thicknesses (1, 1.5, 1.75, 2 mm & more) in 1, 2 & 3 ply options. Our PU Conveyor is imported from Switzerland | Germany | Spain | India & China as well.

PU Conveyor Belt Installation

We are conveyor belt stockiest & supplier in Lahore Pakistan from decades. We have installed PU belt in various industries especially in food industries. Industries should install PU Belt if belt carrying products passes closely from heat, cold or cooling heating tunnel. At this place PVC Conveyor is failed or gives small life span. So, it is better to pay little more in one time then to repeated paying less. Replacing also stops production for some time. Most of industries are shifting from PVC to PU. It gives longest life & minor repairs. It is light weight which makes it easy to install.

PU Conveyor Belt Quality

Two types of surfaces are available i.e., Plain MAT and Finished with polyester bottom including inside layer of PU. We can install Carriers Sidewall Conveyor as per specified customer’s requirements like height, width, gap between carriers and offer Belting Joint too.

  • FDA & EU Approved and available in Halal Content too
  • Friendly to products
  • Sealed Edges | Bonded Plies
  • Oil Resistant
  • Durable & Reliable Belt
  • Minor Conveying Costs
  • Easily Clean & Efficient at work
  • Good Abrasion Resistance
  • Suited for both small and large pulley diameter
  • Classically designed for Heat and Cold environment
  • More Shafts grips to reduce slippage
  • Presently available in White, Blue & Green color

Folder Gluer Machine Feeder Belts

Folder Gluer Machine Feeder Belts

Folder Gluer Belts…

Perfect offers Folder Gluer & feeder belts for packaging & gluing machines, box folding & corrugated cardboard industry. These belts exhibit:

  • High co-efficient of friction for exceptional gripping
  • High dimensional stability
  • High resistance to abrasion, oil & solvents.
Technical Specifications
Grade Construction Traction Layer Total Elongation Min Pulley
  Top Cover Bottom Cover   Thickness at 1 % strain Dia
  Material Colour Material Colour   mm N/mm mm
PT-30 NBR Light Green NBR Yellow Polyamide 3.00
PT-40 NBR Light Green NBR Yellow Polyamide 4.00
PT-50 NBR Light Green NBR Yellow Polyamide 5.00
PT-60 NBR Light Green NBR Yellow Polyamide 6.00

NBR:    Nitrile Butyl Rubber

We also offer Customized Belts Grades.
All above products can also be supplied in Toray Polyamide Sheet imported from Japan.


Select your currency
PKR Pakistani rupee
WhatsApp chat
We are Offline
We are Offline ×

Are you sure you want to quit ?

Yes No

Please wait..
Thank you for contacting us, We will be in touch shortly.
This message will appear when chat is set in offline mode

Thank you for chatting with us !

Chat Again