Round Belts

Round belts 

UFB round belts are highly flexible, directionally adjustable, and multi-directional for angular gears. They can be used for conveying as well as for driving applications. As a result of their elasticity, round belts can be installed without a tensioning device. This allows compact machine designs. In addition, the elasticity acts as a security element by reducing shocks in case of brief overloads.

Round belts are highly resilient, and their physical and chemical characteristics are exceptional in many areas: their resistance to hydrolysis is significantly superior to that of most existing polyurethane elastomer. As a result,UFB round belts are resistant to water, oils, grease and benzine. Thanks to their close cross-section tolerances, UFB round belts guarantee uniform power transmission.

PU Rough Belt

Key feature

● High flexibility and impact resistance

● Easily welded by heater

● Outstanding tensile and tear strength

● Resistance to oils, fuels and oxygen

● Good weather ability

● Better abrasion resistance than PU smooth belt

Application

Transmission purposes of newspaper, textile machines, packaging machines, printing presses, food machinery, ceramic processing plants, cannery conveying equipment, wood-working machines, floor and roof tiles and industrial and paper industry machines.  Widely used in the facilities line, the glaze, polishing lines and transmission line.  Cut round belts can be joined as the endless belts as required according to the drive wheel distance and pulley size. 

Description

ITEM No. Specification
BTH02 OD:2mm x L:400M
BTH03 OD:3mm x L:400M
BTH04 OD:4mm x L:200M
BTH05 OD:5mm x L:200M
BTH06 OD:6mm x L:200M
BTH07 OD:7mm x L:100M
BTH08 OD:8mm x L:100M
BTH09 OD:9mm x L:100M
BTH10 OD:10mm x L:50M
BTH12 OD:12mm x L:50M
BTH14 OD:14mm x L:50M
BTH15 OD:15mm x L:50M
BTH18 OD:18mm x L:30M

Physical Properties

SHORE HARDNESS “A” SCALE ASTM D 2240 ULTIMATE TENSILE STRENGTH PSI ASTM D 412 ELONGATION% ASTM D 412 TEAR STRENGTH PLI ASTM D 412 COMPRESSION SET AT 25% DEFORMATION % TABER e ABRASION RESISTANCE CYCLES ASTM D 746 SOLENOID BRITTLE POINT 
85±2 5800 520 425 12 49 -35

 

Notice: These values are based on the test of our present laboratory test specimens.

Select your currency
PKR Pakistani rupee
WhatsApp chat
We are Offline
We are Offline ×

Are you sure you want to quit ?

Yes No

Please wait..
Thank you for contacting us, We will be in touch shortly.
This message will appear when chat is set in offline mode

Thank you for chatting with us !

Chat Again